“Hobart” the famous brand name that is very familiar to all those who are in welding business. The services of all the products of Hobart brand are mythical. Hobart 500553 Handler 210 MVP MIG Welder is one of the best products offered by them. Among all the MIG welders (available in the market) Hobart 210 MIG welder is best of them. This product provides some fantastic service that is useful for both the professional welder and the handyman. 100 automatic feed gun Spool Runner is also with it that only a few companies supply with its welding machine. Now I am going to explain some of the fantastic features of Hobart 210 MVP Review.
Hobart MIG Welder
Features of Handler 210 MVP MIG Welder
1. Easy To Set Up And Use
Hobart handler 210 MVP MIG welder is very easy to setup within a few minutes and quite easy to use (comparing with other MIG welder machine). A setup guide is included with it, to help the user to use the welding machine properly.
2. Favorable for work Environment
The Hobart handler 210 can run off in the power supply between 115V to 230V, depends on the project. That means one can efficiently run this Hobart 210 MIG welder (where the power supply is available) without the help of any extra tool.
Though the weight of Hobart 500553 handler 210 MVP is quite high (around 80 pounds) than the other MIG welder from Hobart company, it is quite easy to carry anywhere with the help of a cart. It is one of the best features of this welder machine.
4. Extremely flexible for any DIY project
One can efficiently operate any DIY project by the help of Hobart handler 210 MVP MIG welder such as corrode systems, garden materials, farm materials, railing and so on.
5. Work with various types of metal
One may need to work with many types of metal such as stainless steel, steel, aluminum and many others and in various thickness of metal in the field of welding. So the user always expects a welding machine that is suitable for different types of metal. And if you are searching such kind of welding machine, then Hobart 500553 Handler 210 MIG welder will be best for you. Hobart handler 210 can weld many types of metal in the thickness from 24 gauge to 3 inch/8 inches. One can quickly adjust the gun between 3 inches to 8-inch reel.
6. High output duty cycle
Hobart 210 MIG welder provides high output (in 130A of the production in maximum 30% duty cycle) for both the beginner and professional welder. This output is high for any light projects in industry and all projects in home/house. If the input power is 115V, then it will provide 20% of the duty cycle in the output of 25A to 140A, and if the input power is 230V, then it will provide 30% of the duty cycle in the production of 25A to 210A.
7. 7 Voltage Setting
Hobart 210 MVP welder offers 4 and seven voltage selection option. Four option for 115V and seven possibilities for 230V. This voltage setting option controls wire feed speed and improve arc performance with low vesicle and scatter. But it is quite tricky to set up the right voltage setting (differ in many factors such as gas type, the thickness of metal and wire diameter) but if you read the instruction carefully, then it will be easy for you and you will quickly overcome this challenge.
8.Spool gun ready
If you are welding aluminum for a long project, then you must need a spool gun because a spool gun ensures smooth wire work. Without Hobart Spool Runner 100 you won’t get a flat performance, and it will cause bird-nesting (wire feeding problem). For using spool gun in welding project, you need to plug in the gun into the welding machine (it’s effortless).
9. Lots of Extras
Hobart handler 210 offers everything that one needs for starting welding adequately such as-
10. Value and warranty
Comparing with another MIG welder in the market with same characteristics of Hobart handler 210 MVP MIG welder, this product comes at an affordable cost (quite low). And Hobart Company provides three years of warranty for Hobart 210 MIG welder. And Hobart Company is known best for proving best warranty service.
Product’s Technical Information
24 x 18.6 x 13.2 inches
3 years limited warranty
The Right Sides of Hobart Handler 210 MVP MIG Welder
Wrong Sides of Hobart Welder 210 MVP
Hobart 500553 Handler MIG Welder
FAQ : Hobart 210 MVP Review
Question: Can the machine able to weld 3/8 inches metal?
Answer: Yes, this machine can be able to weld metal thickness is between 24 gauge to 3/8 inches.
Question: Does the machine offer spool runner 100 with it?
Answer: No, it doesn’t offer it. You have to purchase this separately.
Question: Can this machine weld metal without gas?
Answer: Yes, this machine can weld metal without gas if you are using Hobart Flux core wire.
After reading the whole article, I guess you have gathered better knowledge about Hobart Handler 210 MVP. All its features are fantastic comparing with another MIG welder available in the market. But before purchasing any MIG welder, you must gather much knowledge about the features and functionality of the MIG welder and then compare with other MIG welder or brand and then make a wise decision.